Y2-008RA Aluminum adjustable rear "H" arm kit for YD-2/YD-4
Full specifications
It is an aluminum rear suspension arms of variable length type that greatly enhances the fighting power of the YD - 2 / YD - 4 series. Manufactured with high accuracy of Yokomo's original, improved rigidity around the rear effective for competition drift. It is a variable length suspension arm with a spacer that allows fine adjustment of the tread, and it is also effective as a point of adjustment of the front-rear balance of the machine, as well as a tread change to fit the body.
As an adjustment width, one side minus 2.0 mm from the normal without inserting the spacer at all, one piece each of the attached spacers 0.5 mm, 1.0 mm, 2.0 mm each, so one side up to 1.5 mm from normal to 0.5 mm It can be set in increments. If you prepare a spacer separately, you can use it while raising the rigidity from normal to one side plus about 6 to 7 mm (Please prepare a long universal bone separately). Since inserting / removing the spacer is possible even with it attached to the machine, it can be used as a fine adjustment point during the competition. Especially it is an item recommended for the competition drifter.