YOKOMO |

SD-TB27 27mm Steel Turn Buckle
SD-TB27

our price € 3.5 (91.0 Kč)

SD-TB30 30mm Steel Turn Buckle
SD-TB30

our price € 3.5 (91.0 Kč)

SD-TB33 33mm Steel Turn Buckle
SD-TB33

our price € 3.5 (91.0 Kč)

SD-TB36 36mm Steel Turn Buckle
SD-TB36

our price € 3.5 (91.0 Kč)

D-017 Aluminum Front Chassis Brace for Drift Package
D-017

It is a front chassis brace while increasing significantly pitching stiffness of the chassis front part, leaving flexibility in the roll direction. By changing the balance of chassis rigidity, while raising the steering response of the initial cornering, I draw a sense of stability in a flexible role. Appearance of the chassis will change significantly in the preferred, bright blue anodized as a

our price € 20.0 (520.0 Kč)

Action

SD-TB39 39mm Steel Turn Buckle
SD-TB39

our price € 3.5 (91.0 Kč)

SD-TB52 52mm Turn Buckle
SD-TB52

our price € 4.4 (114.4 Kč)

D-060 Heat-resistant / Withstand pressure (for Gear & Universal Shaft)
D-060

It is a high-performance grease designed to be used as a lubricant of the rotating part of the chassis. While a general joint grease and the viscosity of the same extent so far, with excellent characteristics to the high heat resistance and pressure resistance, the effect is higher in wear reduction, such as joints and gears of the universal shaft. Tube type with a easy-to-use screw cap.

our price € 10.0 (260.0 Kč)

D-122 Aluminum lower caster blockset 7 ° for DRIFT PACKAGE
D-122

　Designed to be used in the drift package / D-MAX, it is lower caster block.Usually by waste type C hub carriers used to hold the steering wheel block, and by a lower plate only, it looks like made large operating angle of the steering without parts machining. Caster angle of 7 degrees / 10 degrees / 12 degrees of the three types of lineup, holds the lower kingpin in the double bearing of the

our price € 10.0 (260.0 Kč)

D-170G Standard Drift Spring Fai1.3 × 9.5 Turn (Green)
D-170G

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-170BK Standard Drift Spring Fai1.1 × 9.5 Turn (Black)
D-170BK

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-170BL Standard Drift Spring Fai1.1 × 10.5 Turn (Blue)
D-170BL

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-170P Standard Drift Spring Fai1.2 × 10.5 Turn (Pink)
D-170P

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-170Y Standard Drift Spring Fai1.2 × 9.5 Turn (Yellow)
D-170Y

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-171BL Progressive Drift Spring Fai1.1 × 10.5 Turn (Blue)
D-171BL

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-171G Progressive Drift Spring Fai1.3 × 9.5 Turn (Green)
D-171G

　　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-171P Progressive Drift Spring Fai1.2 × 10.5 Turn (Pink)
D-171P

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-171Y Progressive Drift Spring Fai1.2 × 9.5 Turn (Yellow)
D-171Y

　To achieve a supple suspension that are indispensable to drift, Long type of spring .. In overall length 32mm which is set the data on the basis of the obtained actual running of the various circuits, in addition to the general equal pitch spring five in the series, even irregular pitch "type, which allows for finer settings The four will lineup. 　unequal-length spring is different parts of the

our price € 6.7 (174.2 Kč)

D-172G FCD 40T Ring Gear (Front × 0.59) For DRIFT PACKAGE Series Ball Different
D-172G

　Changing the front and back of the drive ratio, to enable the running of the counter drift Drift Package series, spare the ring gear of the ball differential for FCD (full counter drift). 40T of FCD 0.59 times for. Rear drive magnification table of the case on the basis of the 0.59-fold front D-172/173 (FCD × 0.59) Rear D-172/173 (FCD × 0.59) One D-174/175 (FCD × 0.69) 1.16 D-143/144 (FCD ×

our price € 5.0 (130.0 Kč)

D-173G FCD 40T Ring Gear (Front × 0.59) For DRIFT PACKAGE Series Ball Different
D-173G

　Changing the front and back of the drive ratio, to enable the running of the counter drift Drift Package series, spare ring gear for the front one-way / solid axle FCD (full counter drift). 40T of FCD 0.59 times for. Rear drive magnification table of the case on the basis of the 0.59-fold front D-172/173 (FCD × 0.59) Rear D-172/173 (FCD × 0.59) One D-174/175 (FCD × 0.69) 1.16 D-143/144 (FCD ×

our price € 5.0 (130.0 Kč)

D-174G FCD 41T Ring Gear (Front × 0.69) For DRIFT PACKAGE Series Ball Different
D-174G

　　Changing the front and back of the drive ratio, to enable the running of the counter drift Drift Package series, spare the ring gear of the ball differential for FCD (full counter drift). 41T for FCD 0.69 times. Rear drive magnification table when 0.69 times the front was a standard D-174/175 (FCD × 0.69) Rear D-172/173 (FCD × 0.59) 0.85 D-174/175 (FCD × 0.69) One D-143/144 (FCD × 0.76) 1.10

our price € 5.0 (130.0 Kč)

D-175G FCD 41T Ring Gear (Front × 0.69) For DRIFT PACKAGE Series Front One-Way
D-175G

　　Changing the front and back of the drive ratio, to enable the running of the counter drift Drift Package series, spare ring gear for the front one-way / solid axle FCD (full counter drift). 41T for FCD 0.69 times. Rear drive magnification table when 0.69 times the front was a standard D-174/175 (FCD × 0.69) Rear D-172/173 (FCD × 0.59) 0.85 D-174/175 (FCD × 0.69) One D-143/144 (FCD × 0.76)

our price € 5.0 (130.0 Kč)

D-180 YD-2 RWD Drift Spring Set (Whole Set, 2pcs x 6types)
D-180

New spring for RWD drift produced by Team Yokomo! Setting is made easier by clarifying the intended use, such as the road surface and running image. By not painting, the function as a spring is improved, and it is a specification that maximizes the characteristics of the material.The front direct type is a rough winding type with excellent response. It responds sharply to steering operations and

our price € 37.7 (980.2 Kč)

TS-2153 Team Suzuki Aluminum Adjustable SP Servo Horn(15~19mm for Sanwa/KO·23T)
TS-2153

Team Suzuki's high precision aluminum servo horn with adjustable range from 15mm to 19mm from servo axis center to servo rod mounting pivot position. It can be set in 0.5 mm increments by replacing the positioning frame. There are two types of positioning pieces, 0 mm position reference and 0.5 mm position reference, and mounting holes are set for each 1 mm. By setting it more precisely and

our price € 28.4 (738.4 Kč)