- YEDA COMPETITION
- CROSS GAMES EUROPE 2023
- Vánoční driftpárty 2022
- YEDA Drift party
- Czech season 2020
- CROSS GAMES EUROPE 2019
- YEDA Drift Party 2019
- YEDA BORY MALL RACE 2019
- CROSS GAMES EUROPE 2018 »
- YEDA / PROTENG Champ. 2018
- CROSS GAMES EUROPE 2017
- YEDA Open CZ/SK Championship
- YEDAcup2017
- Set-Up Driftparty 2017
- CROSS GAMES EUROPE 2016
- YEDAcup2016
- King of RC Nation-Cz/Sk 2016
- Christmas Drift Party 2016 »
- End of Summer 2015 »
Items in action
Contacts
Tomáš Viktora
Vazová 2498
68801 Uherský Brod
phone: +420 776 343 333
info(a)yeda-shop.eu
Czech Republic
EUROPE
Vazová 2498
68801 Uherský Brod
phone: +420 776 343 333
info(a)yeda-shop.eu
Czech Republic
EUROPE
COMPLETE INFOS ABOUTH CHASSIS
OVERDOSE
Introduction » OVERDOSE » XeX V spec.
OVERDOSE / XeX V spec. - page 4
Improved steering stiffness! Aluminum Front Upper Arm Mount for XEX!Introducing the aluminum front upper arm mount for XEX. While the upper area of steering crank was not locked for the standard setup, this mount securely holds the crank, which improves the stiffness of the steering unit and provides accurate steering controls. It eliminates the steering disarray caused by the reactive force from
our price € 40.8 (1,060.8 Kč)
Improved steering stiffness! Aluminum Front Upper Arm Mount for XEX!Introducing the aluminum front upper arm mount for XEX. While the upper area of steering crank was not locked for the standard setup, this mount securely holds the crank, which improves the stiffness of the steering unit and provides accurate steering controls. It eliminates the steering disarray caused by the reactive force from
our price € 40.8 (1,060.8 Kč)
our price € 48.3 (1,255.8 Kč)
our price € 48.3 (1,255.8 Kč)
our price € 48.3 (1,255.8 Kč)
Spec changes are easier than ever!The drive kit for XEX Vspec. !!The drive kit for XEX Vspec., used for the existing shaft drive XEX to make the Vspec. belt drive for smoother and efficient performance.The front oneway and aluminum bearing adaptor is also available for purchase at the same time. Upgrade your machine by using those parts along with the spec changes.
our price € 89.2 (2,319.2 Kč)
our price € 8.6 (223.6 Kč)
It is possible to improve the durability of the belt by stabilizing the tension to the belt by exchanging it with genuine resin. In addition, adding markings that are not genuine makes it easy to make accurate adjustments without mistaking the left and right positions. ※ 2 pieces entered. Two sets are required for one car.
our price € 17.2 (447.2 Kč)
our price € 38.6 (1,003.6 Kč)
Full model change of OD’s favorite item!Aluminum Shock Adjustment Block Type-2!!Introducing the Aluminum Shock Adjustment Block Type-2. This new model allows you to make precise adjustments easier by the use ofspacers,whereas the older model using the ball stud, which was quite difficult to make fine adjustments. Putting the emphasis on the traction, the adjustable area can go outwards further
our price € 40.8 (1,060.8 Kč)
Full model change of OD’s favorite item!Aluminum Shock Adjustment Block Type-2!!Introducing the Aluminum Shock Adjustment Block Type-2. This new model allows you to make precise adjustments easier by the use ofspacers,whereas the older model using the ball stud, which was quite difficult to make fine adjustments. Putting the emphasis on the traction, the adjustable area can go outwards further
our price € 40.8 (1,060.8 Kč)
Full model change of OD’s favorite item!Aluminum Shock Adjustment Block Type-2!!Introducing the Aluminum Shock Adjustment Block Type-2. This new model allows you to make precise adjustments easier by the use ofspacers,whereas the older model using the ball stud, which was quite difficult to make fine adjustments. Putting the emphasis on the traction, the adjustable area can go outwards further
our price € 40.8 (1,060.8 Kč)
Optional parts for Aluminum Shock Adjustment Block Type-2!!The optional parts for the above shock adjustment block is also available. It allows the shock attachment area to go even farther out comparing to the shock end ball 4.8x9, which is the standard feature of the above shock adjustment block. Best suited for high gripped surfaces or fast layout circuit courses.
our price € 6.4 (166.4 Kč)
Now more than ever to prevent interference with the wheel and tire when a large steering angle by a slim shape, now further easy-to-use than ever with additional review and shock mounting position. Also upper arm is the new design so that it can be larger set the caster angle. Making it the best geometry and highly rigid design to keep it.
our price € 19.3 (501.8 Kč)
And wide-angle type for the kingpin, will firmly support the RWD knuckle to the complex movement. It can also be used in adjustable aluminum knuckle such as OD2079.
our price € 6.4 (166.4 Kč)
All new multi-hole Shock Pistons for OD HG Shock! Introducing the Piston Set For HG Shock. The hole diameters are φ0.5 and φ0.6. Having 5-hole and 6-hole gives flexibility in damping force during high and low speed. They assist the chassis to become more grounded when used for rear shock in AWD, also creates mild handlings when used for the front shock in RWD.With those pistons, creating
our price € 22.5 (585.0 Kč)
Refresh your linkage rod ! All new Ball Cap Set !! From OD1171 Ball Caps & Shock Parts Set, only Ball Caps are available now.φ4.3 ball diameter, both 15mm and 20mm length come in 6 pieces each. Made with nylon resin with molybdenum to add toughness and excellent slipperiness.Usable for other brands and convenient for overhauls.
our price € 5.4 (140.4 Kč)
Introducing the aluminum servo saver horn type-2. Created specifically for drift machines, protecting the servos from the impacts during crushes. A must-have item to avoid the crucial servo damages. We were able to overcome the difficulties of combining with the neutral adjustment features and developed a new groundbreaking servo saver to automatically equalize the steering angle for the gyro to
our price € 34.3 (891.8 Kč)
Introducing the aluminum servo saver horn type-2. Created specifically for drift machines, protecting the servos from the impacts during crushes. A must-have item to avoid the crucial servo damages. We were able to overcome the difficulties of combining with the neutral adjustment features and developed a new groundbreaking servo saver to automatically equalize the steering angle for the gyro to
our price € 34.3 (891.8 Kč)
Introducing the aluminum servo saver horn type-2. Created specifically for drift machines, protecting the servos from the impacts during crushes. A must-have item to avoid the crucial servo damages. We were able to overcome the difficulties of combining with the neutral adjustment features and developed a new groundbreaking servo saver to automatically equalize the steering angle for the gyro to
our price € 34.3 (891.8 Kč)
Introducing adjustable aluminum rear upright. The 2 piece structure of axle mount and the upright base allows various adjustments on toe angles, treads and axle heights. ・Now available in 3 toe angles (0°,1°, 2°) by changing the screw positions, making quantitative settings possible. ・Having 5 mounting positions for the upper arms accommodates wide range of settings. ・Tread width can be adjusted
our price € 130.8 (3,400.8 Kč)
Introducing adjustable aluminum rear upright. The 2 piece structure of axle mount and the upright base allows various adjustments on toe angles, treads and axle heights. ・Now available in 3 toe angles (0°,1°, 2°) by changing the screw positions, making quantitative settings possible. ・Having 5 mounting positions for the upper arms accommodates wide range of settings. ・Tread width can be adjusted
our price € 130.8 (3,400.8 Kč)
Introducing adjustable aluminum rear upright. The 2 piece structure of axle mount and the upright base allows various adjustments on toe angles, treads and axle heights. ・Now available in 3 toe angles (0°,1°, 2°) by changing the screw positions, making quantitative settings possible. ・Having 5 mounting positions for the upper arms accommodates wide range of settings. ・Tread width can be adjusted
our price € 130.8 (3,400.8 Kč)
Useful for steering tie rods and many other linkage setups! Long type Φ4.3 ball studs.Introducing the Φ4.3 ball studs. Having the set screws allows the adjustments of length according to your purposes. Giving you the greater flexibility in ball positioning by allowing the use of thick spacers. The positioning is approximately 4mm higher than OD1532 4.3x5 ball studs. Can be used for
our price € 15.0 (390.0 Kč)
Instead of replacing the shocks, upgrading your current high grade shocks to spec.2 is also possible with these spare parts.
our price € 17.2 (447.2 Kč)
Instead of replacing the shocks, upgrading your current high grade shocks to spec.2 is also possible with these spare parts.
our price € 25.8 (670.8 Kč)
Introducing High Grade Shock spec.2. The application of “adjustable length system” allows to adjust the ride heights and preloads separately. Three new features of spec.2 are: ・ The ball bush is used for the shock bracket to create smooth and accurate shock attachments. ・ Increased air room capacity by changing the top cap. Eliminates the stiffness when the shock is in full compression. ・ A
our price € 169.9 (4,417.4 Kč)
out of stock
Introducing the aluminum front upper arm for OD A arm. Made with rigid aluminum, it keeps the proper alignment of the tires under the heavy load in the deep corners. Molybdenum resin bushes are applied to the ball joint of the bulk head side. φ4.8mm ball diameter creates smoother and wider suspension strokes. The steel upper arm shaft allows more precise camber adjustments. The color options
our price € 89.2 (2,319.2 Kč)
Introducing the aluminum front upper arm for OD A arm. Made with rigid aluminum, it keeps the proper alignment of the tires under the heavy load in the deep corners. Molybdenum resin bushes are applied to the ball joint of the bulk head side. φ4.8mm ball diameter creates smoother and wider suspension strokes. The steel upper arm shaft allows more precise camber adjustments. The color options
our price € 89.2 (2,319.2 Kč)
Introducing the aluminum front upper arm for OD A arm. Made with rigid aluminum, it keeps the proper alignment of the tires under the heavy load in the deep corners. Molybdenum resin bushes are applied to the ball joint of the bulk head side. φ4.8mm ball diameter creates smoother and wider suspension strokes. The steel upper arm shaft allows more precise camber adjustments. The color options
our price € 89.2 (2,319.2 Kč)
Introducing the aluminum steering crank for XEX. Machined with duralumin ingot, the stiffness of the crank has been drastically improved comparing to standard plastic made. The solid steering makes the linear drift controls possible. Best for holding the deep angles when entering sharp corners with the ability to stabilize the front tire. The color options are purple, red and black.
our price € 30.0 (780.0 Kč)
Introducing the aluminum steering crank for XEX. Machined with duralumin ingot, the stiffness of the crank has been drastically improved comparing to standard plastic made. The solid steering makes the linear drift controls possible. Best for holding the deep angles when entering sharp corners with the ability to stabilize the front tire. The color options are purple, red and black.
our price € 30.0 (780.0 Kč)
All new aluminum turnbuckle set is now available. The set contains total of six turnbuckles: one 24mm for Vacula, VaculaⅡ& Divall servo linkage, one 80mm for XEX steering linkage, two 35mms for rear upper arms, and two 24mms for steering tie rods. The 24mm for steering tie rod has been re-designed from M3x0.5 pitch to M3x0.25 pitch, making precise toe angle adjustments possible. Please be
our price € 37.6 (977.6 Kč)
All new aluminum turnbuckle set is now available. The set contains total of six turnbuckles: one 24mm for Vacula, VaculaⅡ& Divall servo linkage, one 80mm for XEX steering linkage, two 35mms for rear upper arms, and two 24mms for steering tie rods. The 24mm for steering tie rod has been re-designed from M3x0.5 pitch to M3x0.25 pitch, making precise toe angle adjustments possible. Please be
our price € 37.6 (977.6 Kč)
All new aluminum turnbuckle set is now available. The set contains total of six turnbuckles: one 24mm for Vacula, VaculaⅡ& Divall servo linkage, one 80mm for XEX steering linkage, two 35mms for rear upper arms, and two 24mms for steering tie rods. The 24mm for steering tie rod has been re-designed from M3x0.5 pitch to M3x0.25 pitch, making precise toe angle adjustments possible. Please be
our price € 37.6 (977.6 Kč)
The shock piston compatible with both OD shocks and TRF shocks. The hole diameter is φ0.5 and φ0.6, each available in 5 holes and 6 holes. Making the holes in smaller diameter with more holes creates the optimal oil flow, helping the shock to performs well on variety of courses and road conditions. Includes 2 pieces of φ0.5ｘ5 holes, φ0.5ｘ6 holes, φ0.6ｘ5 holes, φ0.6ｘ6
our price € 21.5 (559.0 Kč)
Frequent maintenance of ball joints is crucial to keep the smooth performance. Makes sure to keep the best condition with periodic bush replacements.
our price € 9.7 (252.2 Kč)
New aluminum bumper support for OD and Yokomo chassis. The double color anodized and added distinctive lines created never-seen sharp and aggressive 3D look. Compatible with variety of chassis including OD chassis, Yokomo YD-2, YD-4 and others. The color choices are purple and red.
our price € 116.3 (3,023.8 Kč)
New aluminum bumper support for OD and Yokomo chassis. The double color anodized and added distinctive lines created never-seen sharp and aggressive 3D look. Compatible with variety of chassis including OD chassis, Yokomo YD-2, YD-4 and others. The color choices are purple and red.
our price € 116.3 (3,023.8 Kč)
Introducing the adjustable front suspension arm Type-2. Not only for OD chassis, but applicable for other manufactures chassis with 3mm suspension pins. Keeping the same caster angle range and shock attachment positions adjustment, the new arm has the suspension arm length adjustment features. Having the 4 degree caster angle range (1 degree adjustment pitch) and suspension arm adjustment length
our price € 174.6 (4,539.6 Kč)
Introducing the adjustable front suspension arm Type-2. Not only for OD chassis, but applicable for other manufactures chassis with 3mm suspension pins. Keeping the same caster angle range and shock attachment positions adjustment, the new arm has the suspension arm length adjustment features. Having the 4 degree caster angle range (1 degree adjustment pitch) and suspension arm adjustment length
our price € 174.6 (4,539.6 Kč)
Introducing the adjustable front suspension arm Type-2. Not only for OD chassis, but applicable for other manufactures chassis with 3mm suspension pins. Keeping the same caster angle range and shock attachment positions adjustment, the new arm has the suspension arm length adjustment features. Having the 4 degree caster angle range (1 degree adjustment pitch) and suspension arm adjustment length
our price € 174.6 (4,539.6 Kč)
Ball differential set for GALM. Strong traction and quick mobility were 2 main characteristics of the standard spool axle however, it required advanced acceleration controls at low traction surface track. Replacing to this ball differential helps to improve the turning performances and provides smoother feelings during the acceleration. If you are a Vacula or VaculaⅡ owner, it’s good to have this
our price € 73.0 (1,898.0 Kč)
All new 6mm thikness high precision aluminum wheel hex hub. 2mm wider treads compare to the original 4mm and adding the spacer allows fine adjustments of treads. A must-have for making wide treads in the front, which is now becoming the main stream of setup. Available only in black. 4 pieces per set.
our price € 45.1 (1,172.6 Kč)
RWD front long axle shaft. Adding extra 2mm on the screws to keep the tightness of wheel nut when using wheel spacers or wide aluminum hubs. Two shafts per set.
our price € 16.1 (418.6 Kč)
The long aluminum bracket for high grade shock is now available. The extra 3mm added to the standard length makes the setups with more rebound strokes possible. Applying the shock top bush minimizes the rattles for smoother shock performance.
our price € 29.0 (754.0 Kč)
